kitchen hot and cold faucet installation method

March 20, 2020

As we all know, the kitchen mixers are divided into hot and cold water. Do you know how to install it? Come and Xiaobian learn how to install kitchen hot and cold water faucet today, learn more skills may come in handy! Before installation, prepare the installation tools and check whether the supporting parts are complete. Common leading parts include: hoses, rubber gaskets, showers, water removal, kidnappers, and decorative caps.

chrome kitchen mixer

●1. Installation of single-hole basin faucet When purchasing single-handle basin faucet, attention should be paid to the outlet diameter. Most of the current market is hard-pipe inlet, pay attention to reserve the height of the water pipe, down from the basin down to about 30 inside the best. When installing, it must be equipped with a special angle valve. The angle valve must be fixed with the hot and cold water pipes of the wall outlet. If there is a distance between the angle valve and the faucet hose, it is necessary to purchase a dedicated pipe to lengthen the link. Do not use other water pipes to connect, otherwise it will leak and fall off due to high water pressure. If the inlet pipe is too long to go beyond the outlet pipe, cut it off.

Note: Do not bend the hose hard to 90 degrees or more than 90 degrees. When installing the basin to remove water, do not forget to purchase the faucet's small connector (short for the faucet). The water pipes buried in the wall must be flushed before installation. brass chrome deck mounted faucet

● 2, thermostatic faucet installation Before installing the thermostatic faucet, first check which side of the water pipe is cold water, which side is hot water, in particular, the hot and cold water pipes connected wrong, so as not to affect the leading future work. Gas and solar water heaters cannot use thermostats, mainly because the water pressure is too low. Install a thermostatic faucet and install a hot and cold water filter. double handle kitchen mixer faucet

●3. Installation of single-hole Kitchen Faucets Since the frequency of use of kitchen faucets is high, it is easy to loosen and move them. It is only natural that all requirements are stable. Therefore, the locking nuts must be tightened. At present, there is a group of leaders in the building materials market to increase the number of nuts fixed in the nut, which has a very good solidification effect. Obvious effect will become a trend of the generation. Learning how to install hot and cold faucets is equivalent to having a small living skill. The most important thing is that when the hot and cold water tap is broken, you can solve the problem yourself without asking for help.

Hot and cold water faucet

The above is the kitchen hot and cold faucet installation method we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou: Hotel shower the shower faucet maintenance method

Next:How about handy hot and cold kitchen faucets?